The F-Series Locksets are an excellent choice for use on residential single and multi-family entrance doors. Features wrought brass exposed trim and a pressure cast zinc tubular lock housing.

Exceeds ANSI Grade 2 standards. Three-piece assembly for fast easy installation. Lifetime Limited Finish and Mechanical Warranty. One piece knob for better security and appearance. Five-pin tumbler C keyway with two nickel silver keys. Door range: 1-3/8 to 1¾ inches thick, standard. Backset: Adjustable from 2-3/8 or 2¾ inches, standard. Required door preparation: 2-1/8 inch cut-out and 1 inch edge bore hole.

Note: All Schlage locks are field reversible. For non-standard set requirements please contact our sales department to order.

Door Hardware Planning & Measuring Guide

Uncoated finishes are "living" and may wear off over time.

Oil Rubbed Bronze is considered a category "B" finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. ORB will also vary from the production lot and additionally from one manufacturer to another. ORB will wear off over time due to the "rubbed" finishing method that has no protective coating or plating.